diy project: natasha’s babydoll coat rack

Another borrowed DIY from designsponge.com...

Natasha’s Babydoll Coat Rack

What You’ll Need:

-Soft body doll with hard plastic hands and feet (they will have a backing on them)
-Piece of wood, about 2 feet long
-12 screws
-Heavy duty keyhole hangers
-Drywall anchors and screws
-GE Silicone II household glue
-Pen or pencil
-Sand paper
-Paint
-Drill
-Screwdriver
-X-acto knife with chisel like blade (#17)
-Sense of humor

Directions:

1. Dismember your doll

2. Arrange hands and feet on board in an order you like. Space them evenly apart, marking their positions with a pen or pencil. Set limbs aside.

3. Drill 3 holes per limb. I counter sank the holes so the board would lie flat against the wall. Make sure your holes will not come too close to the edge of the limb, because the screw make poke out of the side of a hand or foot.

4. Position keyhole hanger and mark the spot. Chisel out the wood until the hanger fits snugly and until the drywall screws’ heads fit.

5. Sand your wood a little and paint it. Let dry.

6. Put some glue on limbs. Screw them on. Let dry.

7. Put anchors and screws in your wall and hang up your new coat rack. Hang up your coats and jackets.